Model ME2

Our ME2 is a Mass Extraction instrument that replaces helium testing with air. Cutting cost and increasing test speed the ME2 is a top of the line leak testing solution. Designed for medium sized parts with high throughput. This unit comes in fiberglass for rugged industrial applications. Stainless steel casing is also available for cleanroom environments.

Request Quote

Product Usage

  • Leak Testing Under Vacuum
    • Slip and Viscous Flow Regime (2 psia to Barometric Pressure)
    • Leak Tightness from 1x10-5 sccs at 2 psia (1 µm defect size); or
    • Hard Vacuum - Molecular Flow (Less than 0.1 psia)
    • Leak Tightness from 6x10-7 sccs at 0.02 (0.1 µm defect size)
  • Mass Extraction Testing
  • Medium Sized Parts, Higher Throughput
  • Cleanroom or Industrial Applications
  • CE Approved

Features

  • Micro-Flow Sensor - The Intelligent Gas Leak Sensor (IGLS); or
  • Molecular Flow Sensor - The Intelligent Molecular Leak Sensor (IMFS)
  • Automated Vacuum Test Circuit, Uniquely Designed for Ultra-Tight Leak Specifications.
  • Built in Balance and Quick Evacuation Circuits
  • Touch Screen Display
  • Built-In Verification Orifice (Equivalent Channel or Diameter) and Valve
  • Digital and Analog I/O Interface
  • Ethernet or Serial Interface
  • Stainless Steel Enclosure for Cleanrooms
  • Various Sizes of Oil-Less Vacuum Generation and Control Packages Available
  • Optional Test Cart with Vacuum Generation and Control Packages

All Products Ship Fully Calibrated. NO Daily Calibration Required.

  • 17"W x 24"H x 19"D (Does Not Include Connectors & Fittings)
  • Cart Size: 28"W x 47"L x 20"D (Optional)
  • Vacuum Generation and Control Packages are Externally Mounted on Optional Cart

Connections, I/O & Power

Power Supply :

  • 115VAC - 60Hz
  • 220VAC - 50Hz (optional)

Pneumatic Connections: 

  • Test Ports:(Application Dependent
    • Air Supply: 1/4" Swagelok
    • Vacuum: 3/8" to 1" NW

Digital Inputs:

  • 5 VDC, Opto-Isolated for Start, Stop, Type, Pressure Switch, Verify

Digital Outputs: 

  • 30 VDC - 20 mA, Opto-Isolated for Pass, Fail, Clamp, Test Type, Exhaust and Custom.

Analog Outputs:

  • Single Channel, 0-5 VDC Pressure Control

RJ45 Ethernet or RS232 Serial Interface

Applicable Miro-Flow Sensors:

  • Sensor IL2-M at pressures up to 10 psig
  • Sensor IL2-C
Specifications

Product Usage

  • Leak Testing Under Vacuum
    • Slip and Viscous Flow Regime (2 psia to Barometric Pressure)
    • Leak Tightness from 1x10-5 sccs at 2 psia (1 µm defect size); or
    • Hard Vacuum - Molecular Flow (Less than 0.1 psia)
    • Leak Tightness from 6x10-7 sccs at 0.02 (0.1 µm defect size)
  • Mass Extraction Testing
  • Medium Sized Parts, Higher Throughput
  • Cleanroom or Industrial Applications
  • CE Approved

Features

  • Micro-Flow Sensor - The Intelligent Gas Leak Sensor (IGLS); or
  • Molecular Flow Sensor - The Intelligent Molecular Leak Sensor (IMFS)
  • Automated Vacuum Test Circuit, Uniquely Designed for Ultra-Tight Leak Specifications.
  • Built in Balance and Quick Evacuation Circuits
  • Touch Screen Display
  • Built-In Verification Orifice (Equivalent Channel or Diameter) and Valve
  • Digital and Analog I/O Interface
  • Ethernet or Serial Interface
  • Stainless Steel Enclosure for Cleanrooms
  • Various Sizes of Oil-Less Vacuum Generation and Control Packages Available
  • Optional Test Cart with Vacuum Generation and Control Packages
Dimensions
  • 17"W x 24"H x 19"D (Does Not Include Connectors & Fittings)
  • Cart Size: 28"W x 47"L x 20"D (Optional)
  • Vacuum Generation and Control Packages are Externally Mounted on Optional Cart
Accessories

Connections, I/O & Power

Power Supply :

  • 115VAC - 60Hz
  • 220VAC - 50Hz (optional)

Pneumatic Connections: 

  • Test Ports:(Application Dependent
    • Air Supply: 1/4" Swagelok
    • Vacuum: 3/8" to 1" NW

Digital Inputs:

  • 5 VDC, Opto-Isolated for Start, Stop, Type, Pressure Switch, Verify

Digital Outputs: 

  • 30 VDC - 20 mA, Opto-Isolated for Pass, Fail, Clamp, Test Type, Exhaust and Custom.

Analog Outputs:

  • Single Channel, 0-5 VDC Pressure Control

RJ45 Ethernet or RS232 Serial Interface

Applicable Miro-Flow Sensors:

  • Sensor IL2-M at pressures up to 10 psig
  • Sensor IL2-C